01 WEATHER SEAL
This screw used to fasten Alsynite panel to steel girts and purlins. Weather seal technology has better performance to avoid leakage.
XRPGutter is specifically developed for FRP-based buildings. The gutters and downspout systems of XRPGutter are designed to be resistant to corrosive conditions.
This is the basic information on the installation of Alsynite – Premium Quality Fiber Reinforced Polyester. Please read and follow the installation’s instruction carefully before starting. For more detail information, please refer to Alsynite manual installation book.
The Alsynite installation follows the general installtion method
02 CONNECTION MINIMUM
The Alsynite connection is a minimum of 20cm in the longitudinal direction and a minimum of one wave to the side
03 SCREW & WEATHER LOCK RUBBER
Alsynite is installed with screw and weather lock rubber by enlarging a 1-2mm bolt hole from the screw diameter. This is to provide space between the screw and the Alsynite surface in the event of expansion and shrinkage on the surface of the product
Alsynite can be cut using a hacksaw or grinding machine
Alsynite sheets have high quality, where handling and installation in the field must be considered well when the process of storage in the field make sure the floor is clean, flat and dry and protected from dust and dirt